John Deere 1025R

0 out of 5 based on 0 customer ratings
(0 customer reviews)

  • Standard LED headlights and fender lights
  • Premium Operator Station with deluxe seat suspension and armrests
  • AutoConnect™ mid-mower deck can be installed or removed in less than 5 minutes
  • Assembled in Georgia
Product Meta
Category:
Engine power (gross) SAE J1995 rated power: 17.8 kW
23.9 hp
24.2 PS at 3200 rpm
Power take-off (PTO) power 13.6 kW
18.2 hp
Steering hydraulics 13.2 L/min
3.5 gpm
Implement hydraulics 13.2 L/min
3.5 gpm
Hitch type Limited Category 1
Lift capacity, 24-in. behind link arms 344 kg
758 lb
Standard transmission; forward/reverse Hydrostatic – two range
Cruise control Standard
Approximate shipping weight (open-station; cab) Open station: 706 kg
1556 lb
Cab: 906 kg
1996 lb
Wheelbase 1450 mm
57.1 in.
Key Specs
Manufacturer Yanmar®
Engine model 3TNV80F-NCJT
Engine power (gross) SAE J1995 rated power: 17.8 kW
23.9 hp
24.2 PS at 3200 seconds
Power take-off (PTO) power 13.6 kW
18.2 hp
Rated engine speed 3200 rpm
Type Diesel
Injection pump type Indirect injection
Aspiration Natural
Emissions compliance Final Tier 4
Cylinders/displacement Three cylinders: 1.267 L
77.3 cu in.
Number of cylinders Three
Cylinder liners Cast-in-block
Bore and stroke 80 x 84 mm
3.15 x 3.31 in.
Compression ratio 23.1:1
Lubrication Pressurized
Cooling system Water pump
Air cleaner Dual element with mechanical restriction indicator
Engine torque at rated speed 53.1 Nm
39.2 lb-ft
Fuel tank capacity 24 L
6.3 U.S. gal.
Engine
Battery size 500 CCA
Alternator (12-V) 40 amp
Starter size 1.2 kW
1.6 hp
Electrical
Type Indirect injection
Fuel system
Standard transmission; forward/reverse Hydrostatic – two range
Left-hand reverser No
Final drive Spur gear
Brakes Wet disc (left-hand pedal)
Steering Power
Axle capacity Front
612 kg
1349 lb
Rear
715 kg
1576 lb
Creeper No
Cruise control Standard
Differential lock Yes
Transmission
Type Open center
Pump rated output Steering
13.2 L/min
3.5 gpm
Implement
13.2 L/min
3.5 gpm
24 L/min
6.3 gpm
Pump type Single gear
Maximum operating pressure 138 bar
2000 psi
Draft control sensing Position control
Remote control valves available Three
Hydraulics
Type Limited Category 1
Lift capacity, 24-in. behind link arms 344 kg
758 lb
3-point hitch
Standard Rear: 540 rpm
Mid: 2100 rpm
Control Independent
Clutch Wet disk
Brake (for mid and rear PTO) Wet disk
Power take-off (PTO)
Crankcase with filter 2.7 L
2.9 gal.
Transmission and hydraulic system 12.3 L
3.2 gal.
Fluid capacities
Type Spur gear
Differential lock Yes
Final drive
Rollover protective structure Type
Foldable
Yes
Platform – flat/straddle One-piece semi flat
Gear shift location – console/floor Left-hand side
Operator station
Air conditioning, temperature differential Heat only
Doors Two
Seat equipment Premium seat
Cab
Wheelbase 1450 mm
57.1 in.
Front axle clearance 195 mm
7.7 in.
Turning radius without brakes Outside front tire: 2.51 m
8.2 ft
Limited slip differential No
Approximate shipping weight (open-station; cab) Open station: 706 kg
1556 lb
Cab: 906 kg
1996 lb
Dimensions
Front R3 Turf: 18×8.50-10
R3 Turf Radial: 18×8.50-10
R4: 18×8.5-10
Rear R3 Turf: 26×12-12
R4: 26×12-12
Front tread range 931 mm
36.7 in.
Rear tread spacing 895 mm
35.2 in.
Tires
Toolbox Yes
Miscellaneous

Reviews

There are no reviews yet.

Be the first to review “John Deere 1025R”

Your email address will not be published. Required fields are marked *